Height of Ikea Pax frame

[pbengtsson]

I have obtained complete sliding doors with tracks that are meant to be mounted on a PAX frame.
The thing is, I am building the frame myself and need to get the height measurement on the inside.

The doors are of the lowest model (201cm) and I need to know the exact measurement from the top of the bottom plate to the underside of the top piece.
I managed to figure out the side measurements, but the height...

Other height measurements might be helpful as I know how the frames are constructed and could then calculate it all.

Regards

 

[FredrikR]

Can measure when I get home from work if you haven't already received an answer then.

 

[pbengtsson]

I think it will be the same measurements as on Faktum's frames, i.e., 190.8cm internally.
I mounted the rail at the top edge and measured the door, and it was about 191cm, so that could be likely.
If someone has the exact measurements, I would be more convinced about where to make the saw cut.

 

[FredrikR]

I measured, 1907mm from the top of the bottom to the underside of the top panel I got. So the actual inner measurement of the wardrobe.

Sent from my YP-G70 using Tapatalk

 

[pbengtsson]

I measured, got 1907mm from the top of the bottom to the underside of the top shelf. So the actual inner dimension of the wardrobe.

Sent from my YP-G70 using Tapatalk

Thanks!