Habo K20/30 sliding door fittings

[Derbyboy]

Those of you who have used K20/30, what thickness on doors have you used?

I want as small a gap between the door leaves as possible but at the same time not too heavy doors.

My plan is to use 3-4 doors of 19mm MDF, completely smooth painted, and then buy the track that is simple in order to mount the tracks as close to each other as possible.

 

[Derbyboy]

Someone must have used Habo K30 for their sliding doors

 

[myrstack]

If inspiration from K-50 helps, check out my project I wrote about here https://www.byggahus.se/forum/threads/bygga-egna-skjutdoerrar.395745/#post-4461912

 

[Derbyboy]

Already checked, looks good but I want less space between the doors. Ideally, it would be 2-3 mm.

 

[myrstack]

Understood. With K-50 and such thin covering sides I used, it is not possible, and generally, I think the doors flex too much for less than a 4-5mm gap. The distance naturally becomes smaller with thicker door leaves, but then you also get a different appearance that I wanted to avoid.

 

[Derbyboy]

Don't think hanging doors flex. They should stretch and hang straight, but I could be wrong.