Hello,
I need to attach an angle bracket to a brick wall to hold a trellis. Instead of drilling and plugging, can one use some kind of adhesive that bonds to both the brick and the metal of the angle bracket?
Note: It's not supposed to support the entire trellis, as it's already standing on feet, just to keep it close to the wall a bit.
Would something like this work you think? https://www.biltema.se/bygg/kemikalier/lim/stenlim-2000029972
I need to attach an angle bracket to a brick wall to hold a trellis. Instead of drilling and plugging, can one use some kind of adhesive that bonds to both the brick and the metal of the angle bracket?
Note: It's not supposed to support the entire trellis, as it's already standing on feet, just to keep it close to the wall a bit.
Would something like this work you think? https://www.biltema.se/bygg/kemikalier/lim/stenlim-2000029972
Pl 400 works, you just need to have a way to keep it in place while it cures.
Stenlim PU, it expands though, so don't use too much. Then you need something to keep the brick in place until it cures; I've been quite successful with just duct tape, but it varies depending on the situation, of course.