Folding table, MDF or Plywood???

MrWalker35 · 2009-04-28T15:26:09+00:00

Hello. I'm going to build a table/surface that can be folded up against the wall when not in use. My son will have a car track on it, but to save some space, I want to solve it this way. A 45x70 batten is attached to the wall and one to the surface. These will then be linked with hinges. Legs are missing from the picture but will be used. The question is MDF or plywood, and what dimensions are needed. The surface will be full size, i.e., 2440x1220, and the entire inner side will be reinforced by being screwed into the batten, then a frame will be added around it according to the drawing. Plywood seems a bit lighter and "better" to screw into, I've been told, but many recommend MDF. But it shouldn't weigh so much that it's hard to handle. The wall is double drywall with probable metal studs. I will probably have some smaller block and rope to help with hoisting, and of course, there will also be a locking mechanism for the folded-up position. But the main question is plywood or MDF, 16 or 19mm. It shouldn't weigh too much but also shouldn't bend. /Henrik

See original (Swedish)

Page 2 of 2

Qnap

#16

Member

· 3 posts

9 Feb 2021 at 4:21 PM

Qnap

Member

3 posts

9 Feb 2021 at 4:21 PM

Hello!
Did you get a table? I'm considering something similar.

Folding table, MDF or Plywood???

Qnap

Qnap

Similar threads

Repair damaged MDF table

Matbord med stenskiva - lägga på MDF-skiva och stålben?

Black veneered MDF - as a tabletop?