EPS or XPS Jungle, what to choose?

[Mazen]

If you look again at Finja's construction solution, you'll see that it's included there (number 2 in the image).

I saw it, but haven't reflected on its function until now..Good, you learn something new every day.

 

[Mazen]

Thank you very much for all the inputs, the shopping list is almost finalized.

▪︎ Cellplast 150 - 50mm
▪︎ Kantremsa
▪︎ Flyt Finja 260

But then the question of reinforcement or no reinforcement came up... is it overkill with fiber-reinforced screed?
There seem to be differing opinions and the fact that a mesh costs about 80 SEK each and we need about 20... it adds up!

What does the panel think about plaster mesh?
At least it provides some reinforcement and the heating cable can be attached to the mesh.
https://www.biltema.se/bygg/murning/armering/putsnat-2000022891

 

[mexitegel]

What does the product sheet for the self-leveling compound say about reinforcement?

 

[Mazen]

What does the product sheet for the self-leveling compound say about reinforcement?

There is nothing about reinforcement in the product sheet, but in Finja's guide over floor constructions (which has been mentioned earlier in the thread) reinforcement is illustrated when you have foam as a base..

 

[mexitegel]

There you go, there's the answer - and it says there's either golvnät or N4150-net depending on the construction 😉.

 

[Mazen]

Well then, there you have the answer - and it says there are floor nets or N4150 nets depending on the construction 😉.

But it states 30 mm thickness, we are going to float 10-12 mm and it's not obvious when I try to read up on it. A plaster net is at least better than nothing, so that will have to do. Thanks for the input.