Custom-sized timber; 8x160, 8x105

[Messier1994]

Hello!

I am in search of custom-planed pine in two dimensions.
1. 8x105
2. 8x160

The only fixed measurement is the width of 105mm on the first one. In an emergency, I can go up to 12mm thickness, but I would preferably avoid it.

Anyone have tips on a good supplier? I have been in contact with a local sawmill (Uppsala), but they were also farmers and didn't have space for smaller orders right now.

I have no experience at all with custom-ordered timber.

 

[fribygg]

Hello!

I am looking for custom-sized planed pine in two dimensions.
1. 8x105
2. 8x160

The only fixed measurement is the width of 105mm on the first one. In an emergency, I can go up to 12mm thickness, but would prefer not to.

Does anyone have tips for a good supplier? I have been in contact with a local sawmill (Uppsala), but they were also farmers and currently had no space for smaller orders.

I have no experience at all with custom-sized wood.

I suggest gluing planed pine to the desired width, it is available in 8mm thickness.

 

[Messier1994]

I suggest that you glue planed pine to the desired width, it is available in 8mm thickness

Will try!

Is it just wood glue and clamps?

 

[Messier1994]

Going to try!

Is it just wood glue and clamps?

But they will be visible as strips and need to be stained. Have spammed sawmills within a few dozen miles, hoping to get a hit, to avoid a joint.

 

[justusandersson]

What you need is a custom woodworking shop. Such thin dimensions are planed in a planer and edged in a jointer saw. They also have the skvistrena and dried pine that the purpose requires, which is not available in a traditional sawmill.

 

[andersmc]

Hi!

I'm looking for custom-sized planed pine in two dimensions.
1. 8x105
2. 8x160

The only fixed dimension is the width of 105mm for the first one. In an emergency, I can go up to 12mm in thickness, but would prefer not to.

Anyone have tips on a good supplier? I've been in contact with a local sawmill (Uppsala), but they were also farmers and didn't have room for smaller orders right now.

I have no experience at all with custom-ordered timber.

How much do you need?

Lidl is currently selling a simple planer. Buy one of those, and you can plane down standard moldings from the building supply store.

 

[richardtenggren]

Ask your nearest dealer to contact PO.Hiller, they can plane on order

I was planning to buy my moldings from them, but it turned out to be a bit too expensive for the small amount we needed. So after some discussion, I went with furu (was interested in gran).

 

[Messier1994]

Thank you all!

I have received help from Veckebo Såg. Delivery will take a few more weeks, but they have been very helpful and I believe the result will be good.
https://veckebosag.se/