I'm going to try to chisel out a cable duct about 1 meter + three "holes" where I will place boxes. I have never chiseled before, so I am now wondering what tools I should use? Can the tools be rented? Who might be renting in the Lund/Malmö area?
Thankful for answers
/Daniel
Thankful for answers
/Daniel
Almost all tools can be rented, e.g., Cramo must be nearby. I assume it's concrete you're going to break?
http://www.cramo.se
http://www.cramo.se
Know-It-All
· Härifrån
· 789 posts
If it's concrete and only one meter, just take a chisel and hammer away.
Otherwise, you can search for "Concrete groover" / "Grooving in concrete" or similar on the Electrical forum or tool forum, the question has been asked many times.
Then you need a hammer drill with a hole saw for the holes (74 or 84 in diameter depending on which box you will use).
Good luck with the grooving!
Otherwise, you can search for "Concrete groover" / "Grooving in concrete" or similar on the Electrical forum or tool forum, the question has been asked many times.
Then you need a hammer drill with a hole saw for the holes (74 or 84 in diameter depending on which box you will use).
Good luck with the grooving!
