Carport, how to stiffen..?

[Himmelsfararen]

Hi, building a carport 730x340, 5x2 foundation blocks M16 and 5 Y in the rock with M20 bolts. 90x90 posts and 45x195 beams, half in half on the sides together with 45x120 between the posts. Length spliced half in half. 7 rafters, tongue and groove wood.

Considering a diagonal brace for reinforcement, would you place one from one corner to the other corner diagonally on top of the horizontal rafters or from one corner to the middle to another corner like a V?

Planning a bracket with reinforcement in the corners. https://www.jemfix.se/konsol-250-x-350-galvaniserad/5107/9058749/

No walls planned for now, but a cross on one gable.

Happy to take some ideas

 

[supakmegusta]

Hi, building a carport 730x340, 5x2 plinths M16 and 5 Y in the rock with M20 bolts. 90x90 posts and 45x195 beams, half in half on the sides together with 45x120 between the posts. Length spliced half in half. 7 trusses, grooved timber.

Considering diagonal bracing to stiffen up, would you place one from one corner to the other diagonally on top of the horizontal members of the trusses or from one corner to the middle to another corner like a V.

Planning a bracket with stiffening in the corners. [link]

No walls planned now-however a cross in one gable.

Would love some ideas

Hi! How did you stiffen it up? Have the same problem.

 

[Himmelsfararen]

Hi! how did you reinforce? have the same problem

Hi, sorry for the late response. Crisscrossed 22x95 type on the inside of the rafters. Helped a bit at least!

 

[supakmegusta]

Hi, sorry for the late reply. Crossed 22x95 type on the inside of the rafters. Helped a bit at least!

Picture?

 

[Himmelsfararen]

Image?

Unfortunately and now rebuilt.. this was what I found..