RoTe
Stickan56 Stickan56 said:
Precis. See my comment #56 with a base with slatted bottom, pocket spring mattress, and top mattress all from IKEA.

Stickan
Yes, I saw that and then asked why we are so backward in this country. It's like we hate ourselves to the extent that it borders on self-destructive behavior.
 
Last edited:
The backward thing is to have stairs that are so narrow and curved that you can't get a regular bed base up (and can barely walk on them without hitting the wall or railing).

I also had that in the previous house, but there was a balcony on the upper floor with double doors so all such beds had to be taken up that way.
 
  • Like
Bor i pepparkakshus and 4 others
  • Laddar…
RoTe
Should you have a big staircase so you can move a bed once every ten years? Or should you use your expensive square meters to heat up better?
 
Stickan56
D Dilato said:
The backward thing is having stairs that are so narrow and curved that you can't get a regular bed base up (and can barely walk in them without hitting the wall or railing).

I also had that in the previous house, but there was a balcony upstairs with double doors, so all such beds had to be taken up that way.
My current house is a stairless single-story that you can fix when it's time for a walker. 😂

Stickan
 
  • Like
basseman and 1 other
  • Laddar…
fubar fubar said:
Isn't that my line anyway??!
Indeed, you'll just have to be quicker next time. 😁
 
And for those of you who like The Hitchhiker's Guide to the Galaxy, Douglas Adams has written an even better book called Dirk Gently's Holistic Detective Agency. In it, the solution can be found.
 
  • Like
Bassrunner and 2 others
  • Laddar…
R
H Hhallden said:
Can't get the 120/200 bed up the stairs, the post that's in the way is load-bearing and goes down to the floor. My idea is to cut the post at an angle and then screw the thing back together. Just need to find a nice saw
What do you think?
Buy a narrower bed.
 
H Hhallden said:
Can't get the 120/200 bed up the stairs, the post that's in the way is load-bearing and goes down to the floor. My idea is to saw off the post at an angle and then screw it together again. Just need to find a nice saw
What do you think?
When assembling a staircase like this, you do it from the top, meaning the two upper stringers with steps and risers - without a railing - constitute a run. This run is put in place first, then the lower run comprising the four lowest steps. If you can access and remove the screws holding it against the wall from beneath and behind the lowest run, you might get more space to better raise the bed. Could be worth trying. Good luck....
 
  • Like
vbg-1
  • Laddar…
E ErikFolke said:
When assembling stairs like these, you do it from the top, i.e., the two upper stringers with steps and risers - without railing - constitute a flight. This flight is placed first, and then the lower flight with the four bottom steps. If you can access and unscrew from underneath and behind the lowest flight the screws that hold it against the wall, you can get more space to better lift the bed up. It might be worth a try. Good luck....
Forgot that the screws in the left part of the flight against the long post should also be removed.
 
  • Like
Hhallden
  • Laddar…
I owned an apartment in Spain in a 1980s building on the 5th floor and had bought a new leather corner sofa. There they offer home delivery at no cost and 2 guys came with the sofa, which of course didn't fit in the elevator, so they had to carry it up with slanted ceilings in the stairwell, and after a lot of effort, they got it up to the entrance door. The next problem was that it didn't fit through the door, so it had to be unscrewed and the legs had to be dismantled. Once inside the hallway, it had to go into the living room, door removed, but 2 cm were missing, so the door frame had to be dismantled. I was super stressed by now, and the guys were soaking wet since it was 30 degrees warm, but they solved it without complaining. I felt obligated to offer them cold beer and 25 euros each; they laughed and were super satisfied, as was I (they also took the old sofa with them without any problem). This would never have worked in Sweden; there, they just dump the stuff on the sidewalk.
 
  • Like
Dilato
  • Laddar…
Haha, in my teenage years I delivered TVs and appliances, it was only people without elevators who ordered home delivery WITH carrying in/installation. But back then I could carry a 28-inch old Sony TV under each arm, now I can only carry 1...)
 
  • Haha
Dilato
  • Laddar…
H Hhallden said:
Can't get the 120/200 bed up the stairs, the post that's in the way is load-bearing and goes down to the floor. My idea is to saw off the post at an angle and then screw the thing back together. Just need to find a nice saw
What do you think?
I have a very similar staircase.

We took down all the spindles up to about ceiling height, which gave the extra cm needed to push up a 120-bed with only minor damage to the wall.
 
P
"Funny problem" :\

Do you really not have a window upstairs that's large enough?
But sawing the post? Can't you remove the plugs for the screws (as seen in the picture) and unscrew it instead?
 
A
P PappasHammare said:
"Funny problem" :\

Do you really not have a window upstairs that's big enough?
The absolute majority of openable windows are pivot windows with a so-called H hinge that allows the window to swing around 180 degrees when opened.

So if you want to bring in a 1200mm wide bed, the window needs to be 13-1400 wide, and how often do you have such wide openable windows...
 
Last edited by a moderator:
RoTe RoTe said:
Why is it standard in Sweden to have a mattress with a built-in wooden frame anyway? It's so much more convenient and smarter to have the soft part separate from the wood/hard part...
I've wondered that for a long time too. When I bought my first bed in Sweden, I spent a week shaking my head.
 
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.