Building Interior Wall

[correadde]

Hi..
I am going to build a wall that forms an L, how should one do it to ensure it looks good at the edge where the drywall panels meet each other.

 

[ByggaNytt]

If you are not going to have OSB/plywood/chipboard behind, make sure there are wooden studs or equivalent to be able to screw the gypsum corners into.

At the outer corner, you can advantageously use a so-called metal corner guard!

http://www.byggahus.se/forum/faerg-mala-tapetsera/56059-spackla-gips.html

 

[estwing]

If you won't have OSB/plywood/chipboard behind, make sure there are wooden studs or equivalent to screw the gypsum corners into.

At the outer corner, it's advantageous to use a so-called metal corner bead!

[link]

The tool is called Clinch on, which is used to install the corner bead. So you don't need wood there.

 

[correadde]

Thank you, such hörnlist it will be!