Batten for phantom stove?

[Linus_E]

searched and searched and searched and searched but damn...
can't find a single one.

trying to decide if it will be profiled sheet metal or fantompanna for the stable we are building.
but to be able to compare you need to have all the facts.

is more batten needed for fantompanna?
and if so, how much....
more screws?
harder to lay?

if anyone happens to have an installation guide for fantompanna
(preferably byggax) I would be overjoyed right now.

/ Linus

 

[Linus_E]

nobody got anything to contribute ?

 

[Linus_E]

no one who knows ?

 

[andersmc]

Yes, it requires more battens.
Yes, it's more difficult to lay Fantompannor than regular trapezoidal sheet metal.
Installation instructions, well, the first result I got when I googled "fantompanna" was:
http://www.cbsnordic.se/file_source...akprofiler/Villatak/FANTOMPANNA_MEGAPANNA.pdf

 

[Realmuppen]

Here is Rydab's assembly instructions, http://www.rydab.se/broschyrer/Montanv_takpanna.pdf. I just installed their Ambassador roof tile. You can choose between 350 mm or 525 mm batten spacing depending on the load the roof should handle. No problems at all installing that sheet, just follow the instructions.

 

[wilmas]

Had decided on the fantompan from byggmax, but once there I changed my mind to regular sheet metal instead. The pannplåten was so flimsy that you could press marks into it with your fingers... their regular one is thin too, but much stronger than the pannplåten.

 

[Linus_E]

aha...
humm will have to go down and take a look at the plåtarna.
don't want to lay battens twice if I'm going to use "regular" plåt....

big thanks for the help with the descriptions....

 

[PappasHammare]

I was just looking for an instruction and found this thread so I thought the next person who's searching will find this link instead
http://epi.byggmax.com/Documents/Produktspec/20/Fantompannan.pdf