Hello,
I have replaced the windowsills in the house and have some holes from molly/expansion plugs that need filling. They are about 15mm in diameter, and the material is 10mm masonite board. I tried using regular fine filler, but it sinks way too much, even with 4 layers.
I also have a new front door where the frame was damaged enough that I need to drill out about 15(diameter) x 5(depth) mm, fill, and paint over.
Many suggest Plastic Padding Elastic or Kemisk trä, but my experience with both is that they smell terrible. There are 12 holes plus the door frame that need filling, and I want to avoid a strong odor lingering in the house all day if possible.
Suggestions?
I have replaced the windowsills in the house and have some holes from molly/expansion plugs that need filling. They are about 15mm in diameter, and the material is 10mm masonite board. I tried using regular fine filler, but it sinks way too much, even with 4 layers.
I also have a new front door where the frame was damaged enough that I need to drill out about 15(diameter) x 5(depth) mm, fill, and paint over.
Many suggest Plastic Padding Elastic or Kemisk trä, but my experience with both is that they smell terrible. There are 12 holes plus the door frame that need filling, and I want to avoid a strong odor lingering in the house all day if possible.
Suggestions?
Apply latex sealant first and once it has dried, putty on top.
Was at the paint store, they thought it was very strange that Beckers wood filler wouldn't be enough for this job. They gave me a good price on a new tube and it turned out to work quite okay, sure you still need to apply it 2-3 times but much better than the tube I had before. I noticed now that it's actually from 2016, maybe that has an impact on the function 