I live in a one-story house from Älvsbyhus built around 2016. I currently use the attic for storing items and other things that don't fit downstairs in the house. As it is today, we have an attic hatch on the gable of the house about 4-5 meters up, which makes it a bit cumbersome when, for example, retrieving Christmas items. I've considered installing an attic hatch from the inside to avoid climbing on the outside every time. I tried sawing a section from the attic down towards the ceiling and noticed that there is a lot of insulation.
I would need some help on where I should attach an attic hatch and if there's a sensible way to build a small step-up platform to avoid having to take a final step up to the attic of about 50cm perhaps.
Frame up between the rafters to have something to attach to. Then build a small box around the hatch from, for example, chipboard so that the insulation doesn't fall down. You could build a few extra steps with studs, but it seems like unnecessary work to me.
Why destroy the apartment on the first floor? Build an external staircase instead, convenient and good if you're bringing up large items, and it doesn't disturb downstairs. This is what we did when we built in 2010:
And inside the attic, where there is a guest room at the far end:
Living in a single-story house from Älvsbyhus built around 2016. Currently using the attic for storing some things and other items that don't fit downstairs in the house.
Gotten a bit further, have some people around me who have also commented on an outside staircase to access the attic. The only reason I probably want to avoid such a solution is that I would like to avoid going outside in the winter, for example, and up the stairs to get the Christmas decorations.
Frame between the roof trusses so that you have something to attach to. Then build a small box around the hatch with, for instance, particle board so that the insulation doesn’t fall down. You could build extra steps with timbers, but it seems like unnecessary work to me.
Is the idea to attach the particle board to what is framed between the roof trusses and then attach the hatch itself to the particle boards near the ceiling? Should the particle boards also be fastened to the top of the ceiling to prevent it from moving sideways when climbing it?
However, you may potentially encounter moisture problems in the attic and mold as a result. It is usually difficult to make the hatches completely airtight, and when you open them, a lot of warm humid air rises into the cold attic.
The only thing that makes me probably want to avoid such a solution is that I would like to avoid going out, for example, in winter and up the stairs to fetch the Christmas decorations.
Once a year then? What a hassle!
Comment on my picture: We had so-called Klimatvind, with 100 mm of cell foam insulation on top of the sheathing, so it was warm, dry, and pleasant up there all year round.
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.
