Tiles on tiles ??

[Kemi]

Hello

Perhaps a strange question, but I wonder about the following:

We currently have tiles with T2 underfloor heating in the hallway, about 15m2, 300x300 beige tiles, have raised the floor in the rest of the ground floor with 14mm parquet, so there is an edge towards the hallway. IS IT POSSIBLE to simply apply adhesive and new 300x300 black tiles????

We want to change due to the color, but NOT remove the old ones and install new underfloor heating, and it would align better with the rest of the floor.

Will it be difficult for the heat to pass through double layers of adhesive and tiles, and would it hold???

Grateful for an answer.

Best regards, Tobbe

 

[nimhed]

I'm not a flooring installer, but I don't see why it wouldn't work. (oh, so many "nots" there)

It must be easier for the heat to pass through two layers of klinkers, than, for example, a parquet floor.

 

[Faidros]

I also think it sounds reasonable. It's a shame to tear up functioning underfloor heating.
But you can check through these old threads just to be sure:

Klinker på klinker
Klinker på klinker
Klinker på klinker
Klinker på klinker