Hello!
We are about to start renovating the bathroom.
Where the sink will be, it's very tight.
I've searched for information, but it's very difficult to know how thick the tile is.
I guess the adhesive is 8 mm, the waterproofing layer is 6 mm, and the tile around 10 mm, could that be reasonable? Probably the tile is thinner, but I want to be on the safe side.
The tile is called Conradsson Palmira.
We are about to start renovating the bathroom.
Where the sink will be, it's very tight.
I've searched for information, but it's very difficult to know how thick the tile is.
I guess the adhesive is 8 mm, the waterproofing layer is 6 mm, and the tile around 10 mm, could that be reasonable? Probably the tile is thinner, but I want to be on the safe side.
The tile is called Conradsson Palmira.
6mm top layer? then you're laying it really thick I think
the adhesive might be at most 4mm
the tile perhaps 7-8mm
the adhesive might be at most 4mm
the tile perhaps 7-8mm
Renovator
· Stockholm
· 20 593 posts
You can run a millimeter fix if required, the sealing layer doesn't build much but where corners, strip, and foil meet it might build about 2mm or so. Tiles are normally 8mm but both thicker and thinner ones are available.