Our summer cottage is built in three sections, approximately 3 meters wide, which are then assembled together. Section 3 on the right comes in two different designs. We have option 2 with an extra bedroom but want to take down the wall into the living room as in option 1, and are wondering if it could be load-bearing? The ridge marked in blue.
Our summer cottage is built in three sections, about 3 m wide, which are then assembled together. Section 3 on the right comes in two different designs. We have option 2 with an extra bedroom but want to take down the wall towards the living room as in option 1 and are therefore wondering if it might be load-bearing? The ridge marked in blue.
[image] [image]
If it is assembled from modules, it seems reasonable that each module's "outer walls" are load-bearing, i.e., also the walls between the modules. But it's hard to say just from the drawings.
One can say for certain that the wall with the arrow is not load-bearing. This is clear from the sectional drawing. It's also not usually the case when using volume elements.
You can definitely say that the wall with the arrow is not load-bearing. This is clear from the section drawing. It's also usually not the case when using volume elements.
Thank you very much for your help!
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.
