Sheet metal/aluminum clad building panels??

[kallun]

Hello!

A bit of a strange question follows:

I saw somewhere a while ago at one of the retailers that sell a lot of specialty wood (unfortunately don't remember which) that they had construction boards that were metal-clad. Via a friend, I also hear that aluminum-clad plywood exists. I can't find any pictures of this at all on the web.

What I want is a larger board clad in relatively thick smooth aluminum/stainless steel/sheet metal or similar. Does anyone know if this exists and if so, where I can see a picture and get specifications?

Thanks a lot!

/Kalle

 

[myrstack]

Burglary sheet is 900x2500 and can be obtained for a few hundred. Can be glued to a suitable plywood board or similar depending on use. Someone else may need to advise on the finished product.

 

[kallun]

Burglary plate is 900x2500 and can be obtained for a few hundred. It can be glued to suitable plywood or similar depending on the use. For ready-made, someone else can give tips

Thanks! That could be something. Where is it sold?

/Kalle

 

[anis16]

Saw break-in plates recently at Beijers

 

[myrstack]

My nearest Bygglada Bauhaus has it on the shelf. The pile has been there for sure 4 years without being used so it doesn't seem to be in high demand