Hello,
I've made it a bit tricky for myself; I'm using angle brackets and mounting screws to attach my studs, but right at one of the studs where the door will hang, I can't fit the angle bracket on the other side to secure it. So I need to screw at an angle right there.
I tried using 6 x 70 universal screws from Clas Ohlson and the wood split, then I tried pre-drilling and the screw went in, but the screw head is sticking out quite a bit...
Which screw should I use? The stud (95 x 45 mm) should support a 44 kg door and the hinges are attached there.
Very grateful!
I've made it a bit tricky for myself; I'm using angle brackets and mounting screws to attach my studs, but right at one of the studs where the door will hang, I can't fit the angle bracket on the other side to secure it. So I need to screw at an angle right there.
I tried using 6 x 70 universal screws from Clas Ohlson and the wood split, then I tried pre-drilling and the screw went in, but the screw head is sticking out quite a bit...
Which screw should I use? The stud (95 x 45 mm) should support a 44 kg door and the hinges are attached there.
Very grateful!
I have never used anything other than self-drilling 6*80 or 6*100 screws when fastening such things, works excellently.
For example http://www.byggmax.com/se-sv/byggva...skruv-inomhus-5-6-mm/24964/traskruv-6-0x100mm
For example http://www.byggmax.com/se-sv/byggva...skruv-inomhus-5-6-mm/24964/traskruv-6-0x100mm