Roof truss to HEA260 beam, attachment

[MoggeS]

According to the K-drawing, I should use a truss-frame mount, PL 160x100x8 INF. with 2 through M12. The trusses will be attached to HEA260 beams, so it may be a bit clearer. Does anyone know if there are ready-made mounts in the above dimensions, or will these need to be manufactured? I can't find anything no matter how much I search, and the designer is on vacation, so I can't reach him.

 

[bossespecial]

PL is a common flat steel that needs to be cut to size, standard widths are 100mm. I assume that this/these will then be welded to the HEA beam?

 

[MoggeS]

Of course! I was completely caught up in, yeah I don't know. Of course, they should be welded onto the beams, thank you so much.

 

[KnockOnWood]

Of course they should be welded to the beams

Why not bolt it on?
I.e. attach with screws and nuts.

 

[MoggeS]

Can probably do that too, will check with my smed how he wants to do it, weld or bolt.