Repair floor, wall and ceiling after wall demolition.

[Benji4]

Hi!

What is the best way to repair the holes after demolishing an interior wall? (See pictures)

A) Floor, parquet - is it possible to insert a piece of parquet and still make it look reasonably good?

B) Wall, drywall

C) Ceiling, drywall

Grateful for all tips!

 

[Stefan N]

The ceiling and wall just need to be filled and sanded. I would have replaced the baseboard with a new one. The floor is worse, if it's small, redo it.

 

[Sson85]

Walls ceiling, putty sanding, painting
Alternatively, install an MDF surround if you, for example, don't paint the entire ceiling.

Floors I would have put some spacers then a, for example, 9x120 oak threshold over. If you don't want to redo one/both parts.

 

[Benji4]

both

Walls ceiling, fill sand, paint
Alternatively, put an mdf casing if you're not repainting the entire ceiling.

For the floor, I would put some spacers first, then a 9x120 oak threshold over. If you don't want to redo one/both parts.

Walls ceiling, fill sand, paint
Alternatively, put an mdf casing if you're not repainting the entire ceiling.

For the floor, I would put some spacers first, then a 9x120 oak threshold over. If you don't want to redo one/both parts.

Walls ceiling, fill sand, paint
Alternatively, put an mdf casing if you're not repainting the entire ceiling.

For the floor, I would put some spacers first, then a 9x120 oak threshold over. If you don't want to redo one/both parts.

Yeah, sounds simple. I would've preferred to skip the threshold but I guess I have no other choice if I don't want to redo the floor.

Best filler for the wall and ceiling? How wide (should I fill)?

 

[Sson85]

Like Scotte LH +

Check out their website Scotter/beckers, there's quite a lot of useful information there.