I have removed a "windbreak" on our patio, which extended from the outer edge of the projecting roof to the outer wall itself. What remains is a thin column (45x95) supporting the outer edge of the roof.
I would like to remove it, but realize that it has quite an important function. So I'm considering placing a beam near the wall, extending from the concrete slab up to the roof, fastening it securely all the way up, as well as doubling up with 45x95 (or possibly laminated wood) running under the roof. Additionally, reinforcing with a brace from the wall to the roof about halfway out.
Does this seem reasonable?
The roof is a truss that goes all the way out to the column. However, the last support in the truss comes down right at the corner of the house. (visible behind the wasps' nest in the picture)
What do all you knowledgeable people here on the forum think?
Hmmm... no, not really. But I think that when there's 2dm of wet snow on the entire overhanging roof, something is needed to hold it up... Then it seems strange that they put it there in the first place, if it's not needed? or?
It is probably necessary to go up to the attic and check the condition of the rafters. Truss rafters are normally not designed to have support other than at the endpoints. At the front edge of the roof, there is something that looks like a beam. It seems too thick to be a fascia board, yet a bit too notched/halved to be a beam.
It may be that it is built somewhat against the principles but still holds up. I still think one should check the roof truss in the attic. The roof pitch is very low. If you're unlucky, the snow load can be significant.
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.
