Member
· Nuevo Estockholmo
· 3 529 posts
45x70 and any door frames should be 120 mm. That way you avoid the rebate.
Member
· Nuevo Estockholmo
· 3 529 posts
The wall will be 120 mm if you use 45x70 studs with double boards.Anna1984 said:
If you then use 120 mm frames, you just put trim on each side and then it's done.
If you use, for example, 95 mm frames, then you get a reveal to reach the level with the finished wall.
Another tip is to use 45x95 around the door opening and butt the first layer against it to allow the second layer to pass by, thus having something to attach the frame to. If you use 45x70 in the door opening with pre-drilled frames, the frame screw usually ends up right at the edge of the stud.
Member
· Nuevo Estockholmo
· 3 529 posts
Have combed through their website without finding anything other than 93 and 68 door frames. At least when it comes to Bauhaus, my experience is that they don't have other things in the store than what is listed on the website.
Are 120 frames unusual? I think it's more the rule than the exception to use double plasterboard or osb+plasterboard in walls.
Are 120 frames unusual? I think it's more the rule than the exception to use double plasterboard or osb+plasterboard in walls.
ullberg
Tool enthusiast
· Stockholm
· 4 032 posts
ullberg
Tool enthusiast
- Stockholm
- 4,032 posts
Not unusual when I sold building materials (well, I remember them being 118 though), but that was a long time ago and I don't think you see them as often anymore, so maybe they've reduced the range to minimize tied-up capital. However, I think they should have removed the 68 instead, as I see very little use for it nowadays...Anna1984 said: