Nail Asfaboard

[nybyggaren60]

I will attach the Asfaboards boards, but I don't know which nails to use
I hope someone can help me

 

[Styx]

Paper nails will be fine. Just make sure they're long enough.
35mm should be okay, though it has been a while since I last installed/nail asfaboard.

 

[andersmc]

Cardboard nails will do fine. You can also use drywall screws, if you need to use screws for any reason.

 

[Mats]

I have also used pappspik when building with asfa

 

[Styx]

Drywall screws may not be completely reliable; they should ideally withstand a little moisture where they are without rusting..

Admittedly, there might not be a significant risk of the asphalt board falling off - because you are not planning to use them as the exterior siding of the house , but I still think that the nails/screws to be used should withstand a bit without rusting..

 

[andersmc]

One naturally uses drywall screws for outdoor use.

 

[Styx]

Then I am with you.

Even though I still advocate for pappspik (guessing they are significantly cheaper)

 

[andersmc]

Well, pappspik is the simplest and cheapest. Especially if you have a pappspik gun, then it's pure joy to attach the asfabord. Screws are only needed in special cases, like if you're alone and need to hold the board and attach it at the same time (and don't have a nail gun) or if you want to be able to take the board down again.

 

[nybyggaren60]

Thank you for the help