Hello,
Is it possible to build a concrete slab on top of a ground source heat pump drilling site? If so, how should it be addressed?
 
L
Nothing is impossible, but it is usually not recommended, as there can be leaks in the angle fittings towards the borehole or, in the worst-case scenario, having to remove the hoses due to a leak in the turning block (although I have never heard of this).
With a concrete slab, the hoses are locked under it and can't be lifted for any potential repairs. It's the same as some have experienced with their water boreholes, which they have built into small cottages and garages, where it's not uncommon to need lifting at some point.
 
Can it be fixed with a torpargrund (height = 500 mm)? Thanks!
 
L
The answer is probably no, :worried: to be able to access the pipes, there must be free space of at least 2x2 meters starting at the hole and in the direction of the pipes in the ground, as well as 3 meters up from the ground, hoses are not like a string, they are rigid and require a lot of space
There is nothing to prevent building over the hole, but it's a lottery, could be a losing ticket :worried:
 
It has happened (though it is unusual) that water has seeped up from the borehole due to poor sealing of the casing, rusted-through casing, broken cap, etc., causing the ground to become undermined. Unfortunate if it happens under the house.
 
Last edited:
  • Like
Liteavvarje
  • Laddar…
useless useless said:
Then it has happened (although it is rare) that water has seeped up from the borehole due to poor sealing of the casing, corroded casing, broken cover, etc., causing the ground to be undermined. Unfortunate if it happens under the house.
Hi,
Thanks for the answer. Have a nice day.
 
Thank you (y)(y)(y)
 
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.