Gap front door

[Tomture61]

You can fix it, the karm/door leaf needs to be straightened a bit
But unfortunately, the door must be open, in the middle of the freezing winter, when you adjust.

 

[NicklasP]

Det kan du fixa, karm / dörrblad måste rätas upp lite
Men dörren måste tyvärr vara öppen, mitt i smällkalla vintern, när du justerar.

Great!
Assuming I'm a total rookie at this, the fact that the frame+door is even in place is more luck than skill.

Can you explain in more detail where and how I adjust this?

 

[Tomture61]

If the door leaf needs to be lifted on the left side (viewed from above), then the door frame should be on the right at the top. Do not loosen the bottom fastening to the door frame, but the others on the right side must be loosened. On the left side, the frame should be to the right; same thing there, do not touch the bottom frame screw. I don't know what type of frame screw you have; there are many models. Personally, I am passionate about karmhylsa with screw.

 

[NicklasP]

It should go up on the right side according to the picture taken from the inside.

Can I follow your description then?

 

[Tomture61]

Yes, but right becomes left so to speak.
Or stand on the outside

 

[NicklasP]

Yes, although right becomes left, so to speak.
Or stand on the outside

Awesome! Will try this.
Is there a possibility that this adjustment will improve the sealing pressure and make the door fit tighter against the frame?