Hello. Is there anyone who knows where I can get hold of some extra-long cable ducts? I've tried googling but can't find anything good directly; all I've seen are too small in one way or another, and in stores, I can't find any longer than 2000 mm. The dimensions I'm looking for are B100*D40*3000mm. The width and depth are a must to fit in, and the length must not be less than 3000mm, but it doesn't matter if it's longer. Maybe I have to contact the manufacturers directly and get it sorted out in the worst case.
Member
· Västerbottens län
· 18 047 posts
Thorsmans is 2500 mm but haven't seen longer.
If you place the seams on the channel and cover in different places, it usually looks quite good.
Protte
If you place the seams on the channel and cover in different places, it usually looks quite good.
Protte
Exactly, offsetting the seams is important, and make sure to cut straight and neatly and deburr.
If you're joining lathes, it's preferable to join the factory-made ends; the ends you've cut yourself are best used in the corners.
If you're joining lathes, it's preferable to join the factory-made ends; the ends you've cut yourself are best used in the corners.
Sure, I have adjusted the cover over the joints and made it as neat as possible, but it still bothers me. So I would really like to find some that are 3 m.
I have looked at Thorsmans products and found some things I think could work. Do you know where to get hold of these items? When I search for them, only PDFs come up where I indeed have found what I am looking for and have all the type and article numbers, but can't find anywhere to order them. When searching for ordering these materials, only sites like bygghemma and bauhaus come up. But their range of Thorsmans products is not the same as I am looking for. They only have small channels.prototypen said:
www.elnu.se can probably deliver, if he doesn't have it in the webshop you can order it through him with an E-Number.
Thanks for the suggestion but unfortunately, they were too narrow. A width of 100mm is unfortunately a must. I also need to recess sockets in the channel. Thanks anyway.Enk Projektet said:
Thank you very muchcorre said:
Then it's TEK100 you should have....it's probably possible to order any length...ByggareSchyll said:
Member
· Västerbottens län
· 18 047 posts
If you need outlets in the channel, what you actually need is a windowsill channel.
Thorsmans is sold by ALL electrical wholesalers, 100 x 40 is a fairly common channel.
I can take the E number if I remember, I'm heading out to buy some other channels after lunch.
Protte
Thorsmans is sold by ALL electrical wholesalers, 100 x 40 is a fairly common channel.
I can take the E number if I remember, I'm heading out to buy some other channels after lunch.
Protte
[h=2]E-1161400[/h]But it is only 2.5 m...you probably have to order by item number if you want other lengths...
Member
· Västerbottens län
· 18 047 posts
TIR channels Thorsman's feeder channel
100x40 11-591-53E
100x60 11-591-56
But still only 2.5 meters.
Protte
100x40 11-591-53E
100x60 11-591-56
But still only 2.5 meters.
Protte
That's exactly what I'm looking for. With the F80 front and a bunch of other accessories. Where on earth did you find where you could order it?Enk Projektet said:
I've found all the things I want with all the associated E-numbers in Thorsman's own pdf.
I'm not a business owner, so all wholesalers might not sell to me as a private individual?