Hi. I always feel like I'm asking dumb questions but here goes.
I'm going to install a wall-mounted vanity in the bathroom, and it will be hung on two French screws in the crossbeam that's in the wall. However, I want to use all four attachment points on the vanity, which means two need to be plugged. I have 8 mm tiles plus gypsum board, which totals 20 mm. Is it okay to use gypsum board expanders for double gypsum (which is actually 25mm) for my 20 mm wall?
/M
I'm going to install a wall-mounted vanity in the bathroom, and it will be hung on two French screws in the crossbeam that's in the wall. However, I want to use all four attachment points on the vanity, which means two need to be plugged. I have 8 mm tiles plus gypsum board, which totals 20 mm. Is it okay to use gypsum board expanders for double gypsum (which is actually 25mm) for my 20 mm wall?
/M
Drywall anchors are available in different thicknesses. Never use plastic anchors, as they can dry out and become brittle. When installing drywall anchors and tightening too hard, the threads can break. In that case, just use a wire cutter to turn the washer loose and poke the rest into the wall, then simply start over. Good luck
Click here to reply