David.B.
Hello,

We are in the middle of a kitchen renovation, and the next step is to install new flooring, which will be Bjelin's hardened wood flooring.

Our initial thought was to lay it directly over the current tile, but as I've started to measure more accurately, I realize that each tile isn't completely level, meaning there are some "sharp" edges with differences of up to 3 mm.

So the question is; do I need to remove all the tiles and then use leveling compound?
Or can I just remove the tiles that I find to be uneven and fill in with compound/other materials?

What are your experiences and tips?

Best regards,
David
 
  • A kitchen under renovation with tiled floor, some uneven tiles, an open window to a garden, a blue bag, and a yellow construction light stand.
It's enough to sand down what's high! A foam takes up 1.5-2mm.

Much easier than knocking loose certain stones.
 
David.B.
A atomlab said:
Just sand down the high spots! A foam takes up 1.5-2mm.

Much easier than knocking out certain stones.
Sounds smart! What do you sand with?
 
Rent a concrete grinder plus a suitable vacuum cleaner. Without a vacuum cleaner, visibility will be zero in the dust cloud within a minute. And you'll get dust in every nook and cranny of the house. Even with the vacuum, it still dusts heavily. Tape door gaps, etc., use a good respiratory mask, hearing protection.
 
  • Like
atomlab
  • Laddar…
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.