Distance between studs for 14mm panel?

[Savanna]

I'm going to start framing the interior walls in the cabin and will have horizontal paneling on 95% of all walls.

Is cc60 spacing enough between the studs when the paneling is 14mm thick? I will use noggings where, for example, the TV will be mounted. (if we decide it should be on the wall and not on a TV stand)

/K

 

[verktygsgurun]

You should have cc60 and then a sheet material like OSB and then the panel. Having only a 14mm panel is insufficient.

 

[mångstekta]

Why wouldn't it be enough with just the panel? Never heard of putting OSB behind the panel...

 

[Savanna]

One of the reasons we are installing paneling is to avoid boards on the walls. I personally think 60cc should be enough, plus kortla. But I wanted to check here first to make sure I'm not making a complete mistake.

/K

 

[hantverkare1]

It works perfectly without discs behind, but I wouldn't go more than cc60.

 

[Savanna]

The question is should we actually have 45cc or even 30cc behind? If 60 is enough, I prefer it that way, so we don't have to put more studs on the outer walls. It is 60cc there today.

/K

 

[Pexi]

Cc60 is enough, especially if you already have it kind of pre-planned, as I understood it. Just go for it!

 

[verktygsgurun]

I mostly thought for stiffening purposes, the panel doesn't stabilize anything significantly. But I could be wrong.

 

[Savanna]

Outer walls are studded 60cc, I'd rather not throw in more studs. The inner walls will be up now by Easter. Maybe I should use 45cc for the bedroom walls? The bathroom and boiler room will be 30cc and panels on the walls.

/K

 

[mångstekta]

Drive at 60 everywhere and it will be easier! And it definitely holds!

 

[SBH]

Remember to paint the panel before it goes up. If you are going to paint it.

 

[Savanna]

Superb, then we'll go with 60cc.

We will use Moelven's white-painted panel to save some time. A cabin of 97sqm, I don't want to stand and paint the panel there, or we'll never be done. 😜

Thanks for all the replies in the thread. 😃

 

[SBH]

Great, then we'll go with 60cc.

We will use Moelven's pre-painted white panel to save some time. A cabin of 97 square meters, I don't want to stand and paint the panel; we'd never finish. 

Thanks for all the responses in the thread. 

there are many who have painted the same amount

 

[Savanna]

Wouldn't even paint a 10 sqm room. 😜 Big kudos to those who do it. 😃

Only me and the hubby are building and only on the weekends since the cabin is 300 km away. So it feels pretty good to have a reason to buy pre-painted panels so we don't have to paint. 😃 Additionally, we have bargained the price down significantly, so it won't be so expensive.

 

[Savanna]

Taking a chance on a new question here...

In the loft, we're planning to use chipboard or OSB board and drywall on the walls. Can I attach the boards directly to the studs, or do I need to build a frame? We have 60cc spacing between the studs/trusses. I'm going into town today to buy lumber. It would be great economically if we could skip framing the walls. Otherwise, the plan was 3 horizontal 28*70 (sparse) on the studs, and then the boards on that.

For example, can the electrician run conduits behind the studs, as drilling into them might not be a good idea since they're part of the truss and have a precisely calculated durability.