2,509 views ·
7 replies
3k views
7 replies
Cork/soil behind plaster on 70s villa?
Dug out the sides of the house, which is on a slope, and had about 50 cm of soil up the walls. I discovered that the drainage (Platon) was not correctly done on the sides of the house, so now in connection with building a deck around the house, I have dug up the sides. I discovered that the plaster on the house went deep down below ground level (about 40 cm) and ends all the way down at the base to the slab (slab on grade). In some places, the plaster below ground has cracked and it sounded "hollow" so I started chipping away that part and then found some cork material mixed with soil (decomposed cork?). When I chipped away the plaster that went down below ground, I found this cork material along the entire wall, but above ground, it's lightweight concrete blocks. It seems like they placed this cork material to fill out towards the slab and then plastered all the way down to the foundation outside. Is this something normal from the 70s?
Now the walls will be "open" all the way down to the slab under the new deck (wooden deck), so I have chipped away all the plaster below ground level and removed the cork/soil material that was quite damp...
Now the walls will be "open" all the way down to the slab under the new deck (wooden deck), so I have chipped away all the plaster below ground level and removed the cork/soil material that was quite damp...
Hobby electrician
· E
· 15 401 posts
Any record that has been used for the mold and then remained due to some mistake or "mistake"?
Probably, yes, but strange that they polished it... It seems like the mold was built from these cork boards and then the slab was cast inside and lightweight concrete walls were then stacked on top of the cork boards.Fotografen said:
The cork boards are about 5 cm thick.
Click here to reply

