ceiling gypsum?

[trojlee]

Do you install ceiling gypsum without spackling between the edges?... it is beveled all around... What size is "best"? They come in 60*120 and 60*240??... anything to consider when installing these?... what should be the width of the battens above? Thanks in advance / M

 

[Milkshaken]

Now let's see... The chamfering is meant to make room for the filler... so you apply filler all over if it's a traditional filler depth...
I also usually chamfer the short sides to make room for the filler...

Then, regarding 60x 120 or 60x 240... Yes, that's a matter of taste.... Whichever you prefer to work with, you know....
Do you have c/c 30 in batten distance with these planks...

 

[trojlee]

but isn't the chamfering the "feature" of ceiling gypsum??...they are chamfered on all 4 sides. On Beijer's website it says for ceiling gypsum: "Chamfered edges for ceiling installation without joint compound"???.....
/
M

 

[estwing]

no you should not plaster this.
it's called ceiling plank otherwise
only plaster the screw heads.
then paint
gles 28x70
set 300 c/c
taken 240 length. but how long is the room?
regards
carpenter estwing

 

[trojlee]

the room/garage is 4.2*9m.....

/
M

 

[Milkshaken]

Ok, had a bit of trouble understanding his explanation at first... Yes, it's only the screws that need to be filled... We refer to these planks differently...

 

[trojlee]

What size of shelves is most suitable for my garage then?....
/
M