Hello,
I'm planning to build a small, 25 sqm, Attefalls-garage.
The frame will consist of approximately 1.15m of brickwork with Lecablock, with the first 0.85m below ground level, and then a traditional wooden frame of 45x145mm up to a total height of 2.5m. Flat roof with a 4-degree slope, with either roofing felt or metal as the covering.
Most recommendations suggest using 100x3.4mm nails for the frame, but I have a nail gun that can handle a maximum of 90x2.8mm ring nails.
It seems like it should work, as the load on the frame isn't as high compared to a house frame?
/Dea
I'm planning to build a small, 25 sqm, Attefalls-garage.
The frame will consist of approximately 1.15m of brickwork with Lecablock, with the first 0.85m below ground level, and then a traditional wooden frame of 45x145mm up to a total height of 2.5m. Flat roof with a 4-degree slope, with either roofing felt or metal as the covering.
Most recommendations suggest using 100x3.4mm nails for the frame, but I have a nail gun that can handle a maximum of 90x2.8mm ring nails.
It seems like it should work, as the load on the frame isn't as high compared to a house frame?
/Dea
Last edited:
Member
· Nuevo Estockholmo
· 3 529 posts
It works perfectly with 90 mm machine nails.
Works perfectly on "real" houses too.
Works perfectly on "real" houses too.