B bldr #1 Member · 53 posts 2 Apr 2021 at 3:03 PM bldr Member 53 posts 2 Apr 2021 at 3:03 PM #1 How is it best to attach furring strips above the wall plate and up to the sheathing? My horizontal siding needs to go about 1 panel board above the wall plate. #wall-plate #nail-batten
How is it best to attach furring strips above the wall plate and up to the sheathing? My horizontal siding needs to go about 1 panel board above the wall plate.
H huggan #2 Member · Karlskrona · 7 087 posts 2 Apr 2021 at 3:17 PM huggan Member Karlskrona 7,087 posts 2 Apr 2021 at 3:17 PM #2 Place a vertical rule next to the rafters where you can attach the windbreak and battens.
B bldr #3 Member · 53 posts 2 Apr 2021 at 3:26 PM bldr Member 53 posts 2 Apr 2021 at 3:26 PM #3 H huggan said: Place a vertical batten next to the rafters where you can attach the wind protection and the battens. Good tip. Do you then remove the angle bracket that is attached to the rafter and wall plate?
H huggan said: Place a vertical batten next to the rafters where you can attach the wind protection and the battens. Good tip. Do you then remove the angle bracket that is attached to the rafter and wall plate?
H huggan #4 Member · Karlskrona · 7 087 posts 2 Apr 2021 at 3:33 PM huggan Member Karlskrona 7,087 posts 2 Apr 2021 at 3:33 PM #4 It or take out the jacket. If you do the former, then unscrew from the bottom of the hammer band as well.
It or take out the jacket. If you do the former, then unscrew from the bottom of the hammer band as well.
B bldr #5 Member · 53 posts 2 Apr 2021 at 7:31 PM bldr Member 53 posts 2 Apr 2021 at 7:31 PM #5 Any tips by the way on how to unplug in a simple way? Don't have an overhead router.
H huggan #6 Member · Karlskrona · 7 087 posts 2 Apr 2021 at 8:13 PM huggan Member Karlskrona 7,087 posts 2 Apr 2021 at 8:13 PM #6 Multitool, saw, chisel, knife.
wildeside #7 Member · 3 505 posts 2 Apr 2021 at 8:36 PM wildeside Member 3,505 posts 2 Apr 2021 at 8:36 PM #7 Axe
