Just about to start with the floor joists for my attefallshus. It will be 7.2 meters wide and 3.94 meters deep. According to a description I found online, it should be built as follows:
I'm building the floor joists out of 45x170. Can I go with the description above, or will I need noggings between the floor joists?
About to start with the floor joists for my attefallshus. It will be 7.2 meters wide and 3.94 meters deep.
According to a description I found online, it should be built as follows:
[image]
I build the floor joists from 45x170. Can I go with the description above, or will I need noggins between the floor joists?
You don't need noggins. You lock everything together with the chipboard or floor you have chosen.
The stiffness across the span direction. That means the floor structure cannot buckle under side loads. For example, storm winds on the gable. I believe the noggings shown in the picture are sufficient. But it depends on how large the gable will be and how heavy the house will be.
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.
