1,195 views ·
35 replies
1k views
35 replies
What screws are suitable for drywall, drywall, chipboard?
Sounds like they built a partition wall with a 45mm stud. Then when the kitchen was installed, they added another 45mm stud with chipboard on the outside to create an installation wall where pipes and electricity can run on the backside and cabinets can be screwed into the chipboard. However, rough guess on my part.
That still doesn't explain how there can be 20mm of air between the plasterboards and which plug would fit.Bart said:
Sounds like they built a partition wall with a 45mm stud. Then when the kitchen was installed, they added another 45mm stud with chipboard on top to create an installation wall where pipes and electricity can run at the back and to be able to screw the cabinets into the chipboard. However, this is a rough guess from my side.
I would probably have put in some goo, like filler, and screwed it in.
Or routered out the hole in the inner plasterboard with a bit that you twirl around a bit until the molly has space to expand.
The wall in question is not near the kitchen though 😅Bart said:
Sounds like they built a partition wall with 45mm studs. Then when the kitchen was going up, they added another 45mm stud with chipboard on top to create an installation wall where pipes and electricity can run on the back and cabinets can be screwed into the chipboard. However, this is just a rough guess on my part.
That might be an alternative, even though it feels incredibly cumbersome. I need to get the property manager here anyway so they can fix a door that can't be closed, so it seems like it might be best to ask them what should really be done.B Bjober said:
Click here to reply