2,856 views ·
30 replies
3k views
30 replies
Wood fiber (Plyfa)
Know-It-All
· VĂ€stra götaland
· 10 929 posts
https://www.plyfa.se/I Installation said:
I would guess that Plyfa would like to call plyfa a brand name.. đđ€
H
HEM2121
Member
· VĂ€stra Götaland
· 5 623 posts
HEM2121
Member
- VÀstra Götaland
- 5,623 posts
So this is still being done! That's interesting. I'll be making a call to Myresjöhus to hear their thoughts and which Plyfa they use and what they think about its durability over time.O olotor said:
Homeowner
· Stockholm
· 715 posts
H
HEM2121
Member
· VĂ€stra Götaland
· 5 623 posts
HEM2121
Member
- VÀstra Götaland
- 5,623 posts
In the headline, you wrote fiberboard. Plyfa is not a fiberboard. What is the product that is used in the house?
Is it really plyfa/plywood? I lived in a house from 1991, and there was a type of chipboard as the under-roof. It was slightly green-colored and probably treated with something. From what I could determine, it was unproblematic. It only sagged slightly between the rafters. There were concrete tiles on top, and we had no moisture problems during the ten years I lived there.
H
HEM2121
Member
· VĂ€stra Götaland
· 5 623 posts
HEM2121
Member
- VÀstra Götaland
- 5,623 posts
It is referred to as Wood Fiber Boards (Plyfa), battens, and concrete tiles.Henningelvis said:
Is it really plyfa/plywood? I lived in a house from 1991, and there was a type of particle board as the under-roof. It was faintly green-colored and probably treated with something. As far as I could determine, it was unproblematic. It only sagged slightly between the rafters. There were concrete tiles on top, and we had no moisture problems during the ten years I lived there.
The roofing is constructed parallel from the eave to the ridge/wind.
That sounds wrong. It could probably be fiberboard. But it is usually referred to as masonite. Flyfa, as mentioned, is a plywood board. But oil-tempered "board" is a common solution if you want to keep the price down.
I guess the broker does not know the difference between fiberboard and plywood. It is likely that it is some form of treated fiberboard in the ceiling.
H
HEM2121
Member
· VĂ€stra Götaland
· 5 623 posts
HEM2121
Member
- VÀstra Götaland
- 5,623 posts
That's my feeling too, I think it's Plyfa but TrÀfiberskiva is a description to explain that Plyfa is made of wood. This needs to be checked.D Daniel 109 said:
Lived in a house from '85, now live in one from '92, both with plywood under concrete tiles.
If you maintain the tiles, i.e., clean them and keep moss away, plywood isn't a problem.
A neighbor opened the roof to make a dormer on the house from '85, and it looked like new underneath, the plywood was a bit thicker than the normal 12.5 mm, about 15-20 mm.
Wood fiber, greenish ones some mentioned, are impregnated particle boards, they are worse and tend to sag between the roof trusses over time.
If you maintain the tiles, i.e., clean them and keep moss away, plywood isn't a problem.
A neighbor opened the roof to make a dormer on the house from '85, and it looked like new underneath, the plywood was a bit thicker than the normal 12.5 mm, about 15-20 mm.
Wood fiber, greenish ones some mentioned, are impregnated particle boards, they are worse and tend to sag between the roof trusses over time.
Last edited:
H
HEM2121
Member
· VĂ€stra Götaland
· 5 623 posts
HEM2121
Member
- VÀstra Götaland
- 5,623 posts
If they are greenish, do you know what they are impregnated with?Isakare said:
Lived in a house from 85, now living in one from 92, both with plywood under concrete tiles.
If you maintain the tiles, i.e., clean them and keep moss away, plywood isn't a problem.
A neighbor opened the roof to make a dormer on the house from 85, it looked like new underneath, the plywood was slightly thicker than the normal 12.5 mm, around 15-20 mm.
Wood fiber, greenish as someone mentioned, is impregnated particleboard, they are worse and tend to sag between the rafters over time.
Likely some copper salt.