With what do I seal form plywood?

[Vermilion]

Form plywood used outdoors, if I cut it there will be an unprotected cut edge, what is the best way to seal the edge with? How it looks doesn't matter as it will be covered over later.

In the basement, I have plenty of different paint cans, everything from facade paint, primer, ceiling paint, etc., maybe something there will do the trick?

https://www.byggmax.se/formplywood

 

[larsbj]

Oil the edge with, for example, linolja.
Do not buy the formplyfa at byggmax you linked to.
I had boxes over electric motors outdoors made of real formplyfa, they lasted from 1984 to 2019 when we built new ones of byggmax formplyfa, these came apart at the glue and fell apart completely in 2 years.

 

[Vermilion]

Oil the edge with e.g. linseed oil.
Do not buy the form plywood from byggmax you linked to.
I had boxes over electric motors outdoors made of real form plywood, they lasted from 1984 to 2019 when we built new ones, from byggmax form plywood, these came apart at the glue and fell apart completely in 2 years..

Any good tips on where I should buy at a reasonable price?

 

[topmount]

Any lacquer paint (solvent-based) works fine.

 

[Vermilion]

Any solvent-based paint will work fine.

Like paint from a spray can?? That would be super easy