Hello,

What kind of board material could this be? It is quite soft and is on the outer walls in the closet/attic space in a house built in 1927, but renovated in 1980.

Is it treetex? Can one put gypsum on it or maybe apply filler directly?

Thanks in advance!
 
  • A soft, textured panel on a wall, possibly insulating material, with two visible screws.
  • Close-up of a soft, fibrous board material on a wall, possibly Treetex, with visible wood grain and dark nails in a 1927 house renovated in 1980.
  • Soft brown board material on a wall, possibly treetex, with visible screws. Located in a house's closet or attic space from 1927, remodeled in 1980.
Tretex is not good to use for spackling, it's too dry, and the spackle falls off. However, if you can find the studs, then use gypsum, preferably 13mm. With rotgips 6 mm, it can create dents.
 
  • Like
elloffo
  • Laddar…
Yes, it looks like Tretex. You can certainly put plasterboard directly on it, but I think Tretex can have quite a smell, and I would probably remove it first.
Plastering directly on it was done in the past. But it tends to crack.
 
  • Like
Destrier and 2 others
  • Laddar…
Not actually thought about the smell, isn't tretex just pressed wood material?

-RB- -RB- said:
Yes, it looks like Tretex. Sure, you can put plaster directly on it, but I think Tretex can smell quite a bit and I'd probably remove it first myself. Plastering directly on it was done in the past. But it might crack.
 
Well. Maybe I'm just sensitive ;)
I tore out a part from our attic and the old slightly musty smell disappeared immediately. So I got the idea that it was the tretex that smelled.
 
  • Like
Destrier and 1 other
  • Laddar…
C
If you tear it away, you should keep in mind that it is a material with good insulating properties. Now the boards aren't that thick, but they do make a little difference.
 
  • Like
elloffo
  • Laddar…
Paint with a cheap color first, then you can fill in later.
 
  • Like
elloffo
  • Laddar…
U
Have tested both spackling and renovation plasterboard on treetex. Renovation plasterboard is convenient if it doesn't matter if it adds 6mm, but it complicates things around potential moldings and similar otherwise.

I have also applied broad spackling after painting first, and no cracks (so far at least).
 
  • Like
elloffo
  • Laddar…
Treetex does not contain formaldehyde. It's hard chipboard that does.
 
  • Like
elloffo and 2 others
  • Laddar…
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.