We are going to replace the window with a balcony door, need to remove the radiator. The material in the wall looks like this. Is it safe to saw in? There are two brown boards like the one I'm holding. More porous material. Asbestos anxiety for me.
 
  • A hand holding a porous brown board against a tiled wall. Concerns about the material's safety for sawing, possibly containing asbestos.
  • Close-up view of wall material with porous brown sheets and light textured surface, possibly being assessed for safety in home renovation.
Guessing it's a tretex panel. It's only made of wood fibers.
 
  • Like
Byggfru and 2 others
  • Laddar…
Or building board that was used previously. It is some form of MDF/HDF. Just cut it.
 
  • Like
mikethebik and 1 other
  • Laddar…
You can omit "gissar" in the above post. It's tretex. Free from asbestos.
 
  • Like
Byggfru
  • Laddar…
Thank you, kindly asking further, is this inside the board? Built in the 60s-70s. Is it mineral wool? Is it safe?!
 
  • Insulation material behind a wall panel, possibly mineral wool, from a 1960s-70s construction.
BirgitS
In walls and ceilings around boiler rooms with an original oil furnace, one can find asbestos sheets to improve fire protection, as well as against attached garages. Otherwise, no one scattered asbestos-containing materials just anyhow because it cost money, meaning it was used when it truly was beneficial, but not otherwise.

Also, one shouldn't be afraid of single exposures to asbestos either.
 
  • Like
mikethebik and 3 others
  • Laddar…
Green-tinted, then it is stone wool. (Glass wool is yellow.) It is relatively harmless. It is the handling of them that releases loose particles in the air that irritate the throat. There is no evidence that it is harmful, and yet many construction workers have handled them daily for more than 50 years. However, it is recommended to use some form of respiratory protection, (and full-cover clothing). I personally use simple cheap disposable filters/respiratory protection. They are not as effective as proper filters for the purpose in a half-mask, but you still notice a big difference compared to no protection at all. For those of us who only handle insulation a few times in our lives, it's not a problem. (Protection levels and equipment that may be mentioned in safety data sheets are intended for those who work with the products 8 hours/day, year in and year out.)

So, not dangerous, just unpleasant to handle.
 
  • Like
fribygg
  • Laddar…
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.