Posted this question on the kitchen page, but only got one answer so I'm trying here instead... I want to finish my kitchen and don't feel like waiting four weeks for the plumber. I've installed the Oras Aventa kitchen faucet on my Franke sink, but it's wobbling even though I've cut out an MDF board 25 x 12 cm that sits flush against the back of the sink. (And wobbling isn't great when you have a pull-out spray in the faucet...) Can you stabilize/secure the pipes further down towards the back of the kitchen cabinet or how the heck do you do it???? Does anyone have expertise or tips?? Soon a desperate kitchen builder and a beginner when I started...
Self-builder
· Stockholm
· 8 600 posts
As mentioned above - you probably won't be able to stabilize it sufficiently against the panel alone (mdf or not); you need to attach the stabilization disc to the kitchen cabinet or the wall using angle brackets, for example.
/K
/K
Thanks for the tips!
I'll bring out the jigsaw again and make a new one.
I'll bring out the jigsaw again and make a new one.
Thanks for the tips! I made both a new MDF board just below the sink and also a lower one that the pipes went through, which I attached with angle brackets through the back of the cabinet and the plasterboard... Oh so steady and nice!
Thanks
Thanks