Squeaky stairs!!

[Benita]

Hello
I've been reading a lot now, but I'm still not any wiser about our staircase!!
It creaks and snaps on every step, more or less!!
I've read about screws here and there?? Can't find a single screw for the steps??
So how should I go about making it silent!!?

 

[eviljava]

Is it you who have removed the sättstegen?

Sometimes they have a stabilizing effect and that may possibly be an explanation for why the plansteget moves (wood moving against wood = creaking).

 

[Benita]

no, I haven't done anything with the stairs, it was like that when we moved in here....

 

[SBH]

back with the sättstegen. then check if it creaks the same way

 

[Benita]

They are not available anymore,
But maybe they can be found somewhere??

 

[verktygsgurun]

How do you get into the new step routines?
Feels difficult...

 

[Kurtivan]

It's probably just a planed board. You can try spraying 5:56 with the "straw" on, where the rungs meet the side pieces.

 

[SC Aero]

How do you install the new stair steps?
Feels difficult...

In the same way as when you removed them, but the other way around

 

[verktygsgurun]

In the same way as when you removed them, but the other way around

Saw in half and pry with a crowbar? 😄
No seriously...they are embedded in the carriages, you can't really slide them in from underneath or fit them in any way from what I can see in the pictures at least.

 

[Roundup]

How do you install the new stair risers?
Seems difficult...

MDF board in suitable thickness, height = gap between the steps + rebate in the step above, width = gap between the stringers + the depth of the rebate on one side, which is then pressed against the step above and screwed (+glue?) into the back of the lower step?

No, that probably won't work either, it will be difficult to insert the board unless you're willing to leave an uneven edge (= rebate depth) at the bottom.