I will be repainting the house in the coming days and need to replace some fascia boards that are damaged. It is a Single-phase panel in the size 22x120. I cut off a piece of the existing panel and took it to the store, unfortunately, I discovered that it did not match 100%, the dimensions 22x120 are correct, but the part that fits under the existing board is longer, which changes the slanted angle of the board. I only want to replace the few boards that are damaged, and therefore I want them to match the existing ones.
Where can I find the right model? I have looked at Bauhaus, Byggmax, K-rauta, Hornbach unfortunately did not have anything in stock at all. All the ones I checked are incorrect.
Is there any place in the Gothenburg area that has a larger selection? Preferably primed white, but not a requirement.
You only need to remove 4 mm from the tongue on one board, then the others will sort themselves out?
Unfortunately not, considering all the measurements have been changed, the angle will be different (the one that is 54 degrees in my second example). This is clearly visible when you meet a previous board with a different angle.
Check with Högsbo trä, kungälvs trä, or Sörreds trä (all three are the same chain) they usually have similar things.
I was there just now, and unfortunately, it's the same situation there, they only have one model and it's not the one I have.
His idea was to buy regular tongue and groove paneling and mill the angle you need.
Unfortunately, I don't think that will work either because the tongue and groove paneling has too "large" tongues.
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.
