Hello!
I am paneling the house and tomorrow I will install flashing under the new paneling. The battens are 12 mm and the counter-battens are 25 mm, but how thick is the metal sheet? It's about roof tile metal sheets. (I haven't bought the roofing metal yet, as I will install the paneling first.)
Need to know how far up from the roofing felt on the balcony roof the flashing should be mounted!
Grateful for a good answer! =)
I am paneling the house and tomorrow I will install flashing under the new paneling. The battens are 12 mm and the counter-battens are 25 mm, but how thick is the metal sheet? It's about roof tile metal sheets. (I haven't bought the roofing metal yet, as I will install the paneling first.)
Need to know how far up from the roofing felt on the balcony roof the flashing should be mounted!
Grateful for a good answer! =)
The height varies depending on the manufacturer so to make it really good, choose which sheet you will have and look at the installation instructions e.g. http://www.plannja.se/Documents/SE/monteringsanvisning/se-plannja-monteringsanv-2013-3.pdf