Rails for sliding doors

[Blaxtar]

I have had custom MDF sliding doors made for a wardrobe in our turn-of-the-century house, styled like our over one hundred year old interior doors. However, I am struggling with solving the actual hanging mechanism. There are three doors with a total width of about 270cm and a height of about 190cm that need to run on tracks on the floor and ceiling. Where can I find tracks and fittings to solve the hanging of these?

 

[backstad]

Could something like this solve your challenge:
https://www.bauhaus.se/skjutdorrsram-lundbergs-fantasi-med-hjul

 

[Blaxtar]

Would something like this be able to solve your challenge:
[link]

Thanks! I'll check if that model can suit my needs :-D

 

[KnockOnWood]

Could something like this solve your challenge:
[link]

Thanks! I'll check if that model can meet my needs :-D

I think those were exactly what we installed in our two wardrobes in the bedrooms when we built the house in 2010.
They were two 1.8 m wardrobes, and we installed three sliding doors in each.
Very convenient, and easy to assemble and mount with white-painted masonite/board sheets.

 

[Blaxtar]

After much googling, found https://www.theofils.se which had exactly the things I need

 

[KnockOnWood]

There were two 1.8 m wardrobes, and we installed three sliding doors in each.

No, that was probably wrong! There were likely only two doors per wardrobe.