Looking for a transition strip to place between parquet and tiles.
What I preferably want is a metal one that can be glued on as they are thinner than wooden strips and because I already have one like that elsewhere.
I think a wood/oak-colored strip would be good, but if not available, then a light gray or similar since the floor is beige/light.
Now to the hardest part of all, are there lengths over 2m available? The opening is about 210 but 2m is the max I find with some googling.
I'd rather not buy two and deal with the seam that results.
What I preferably want is a metal one that can be glued on as they are thinner than wooden strips and because I already have one like that elsewhere.
I think a wood/oak-colored strip would be good, but if not available, then a light gray or similar since the floor is beige/light.
Now to the hardest part of all, are there lengths over 2m available? The opening is about 210 but 2m is the max I find with some googling.
I'd rather not buy two and deal with the seam that results.
I have used these multiple times available in 270cm. With awesome tape underneath..
https://www.duuri.fi/sv/profiler/nivalister/?filter_pituus=2700-mm-sv
https://www.duuri.fi/sv/profiler/nivalister/?filter_pituus=2700-mm-sv
Awesome, there were some options there.putte22 said:
Do you have an idea of the price for something like this one
https://www.duuri.fi/sv/sjalvhaftande-nivalist-40mm-ek-faner-for-nivaskillnad-0-12mm-slat-2700mm/
No, unfortunately not any idea. But the ones I bought at 2 meters have cost between 300-500kr. But they are really worth it. You can check at K-ruta if they have them in store, otherwise order from Beijer bygg etc.