M mozze #1 Member · 81 posts 16 Sep 2012 at 7:57 PM mozze Member 81 posts 16 Sep 2012 at 7:57 PM #1 Turning to what might be the right forum section now... Where can I get corner brackets like these?
H Helioz #2 Member · Dumsnål · 1 641 posts 16 Sep 2012 at 9:04 PM Helioz Member Dumsnål 1,641 posts 16 Sep 2012 at 9:04 PM #2 Difficult to see but isn't it just a regular angle bar? Kind of like this: http://www.slojd-detaljer.se/product.aspx?productid=2701&deptid=105
Difficult to see but isn't it just a regular angle bar? Kind of like this: http://www.slojd-detaljer.se/product.aspx?productid=2701&deptid=105
C corre #3 Member · Stockholm · 5 393 posts 17 Sep 2012 at 1:50 PM corre Member Stockholm 5,393 posts 17 Sep 2012 at 1:50 PM #3 Are you going to plaster the corner of the chimney? Can't you use the same as for drywall? Light metal profile with a rounded corner with a radius of about 3mm
Are you going to plaster the corner of the chimney? Can't you use the same as for drywall? Light metal profile with a rounded corner with a radius of about 3mm
M mozze #4 Member · 81 posts 18 Sep 2012 at 6:39 PM mozze Member 81 posts 18 Sep 2012 at 6:39 PM #4 The thing is that what was there had rusted and cracked the plaster. And that corner bead had a "depth" of 1cm as you can see in the picture... The bead looks like those used for plasterboard, but with 10mm...
The thing is that what was there had rusted and cracked the plaster. And that corner bead had a "depth" of 1cm as you can see in the picture... The bead looks like those used for plasterboard, but with 10mm...
M mozze #5 Member · 81 posts 22 Sep 2012 at 1:43 PM mozze Member 81 posts 22 Sep 2012 at 1:43 PM #5 No mason or similar who has even seen a corner iron like this? Is there anyone here who can advise on how I should repair this in the best way?
No mason or similar who has even seen a corner iron like this? Is there anyone here who can advise on how I should repair this in the best way?
