173,124 views ·
223 replies
173k views
223 replies
I have torn down the knee wall now the whole house is thumping
TS has probably understood his mistake now that it's been pointed out in about 100 posts. That a constructor needs to be hired and that it needs to be fixed seems obvious.
The question is if there are more tips on what TS can do right now to minimize the risks until the fix?
/Krille
The question is if there are more tips on what TS can do right now to minimize the risks until the fix?
/Krille
I THINK you are trying to state the obvious, didn't you read my last sentence in the post "That said, since you notice a difference, you should have someone knowledgeable in construction take a look at it."D Martin72 said:It has been done differently, with different principles in how loads are taken and how shear, compression/tension, and moment loads are transferred between construction elements. You can only understand this by finding out how it is done in each case and propose changes based on the specific situation. That is: that *your* house has held up when you've made changes to load-bearing parts that you don't understand how they work doesn't necessarily mean the same change is safe in TS's house. Don't assume. Gather the facts and analyze/calculate what needs to be done.
Your advice is correct. Your comparison that *your* house hasn't collapsed or (as far as you know...) been damaged after you made illegal changes to load-bearing structures is completely irrelevant or, at worst, dangerous: "aaa, but the guy on byggahus had made this change and it went fine...".K Kurtivan said:
TS doesn't have many reasons to respond anymore; the tips and opinions keep coming in... there's nothing more for them to say/explain. Now they need to decide how to fix the problem (which we probably can't practically solve for them at the moment).
One doesn't have to be a troll or weird to leave the threads sometimes. Some threads attract a lot of people, where many say the same things.
You come back when you have a new question or want to announce that you've solved the problem
One doesn't have to be a troll or weird to leave the threads sometimes. Some threads attract a lot of people, where many say the same things.
You come back when you have a new question or want to announce that you've solved the problem
Yes, but to confidently say that it will go to hell, and quickly, hardly helps at all. A bit of pragmatism can indeed be needed.D Martin72 said:
Yes.Snigla said:
TS doesn't have many reasons to answer anymore, the tips and opinions continue to pour in... there is nothing more for them to say/explain. Now they have to decide how to fix the problem (which we probably can't practically solve for them right now)
You don't have to be a troll or weird to sometimes leave the threads. Some threads draw a lot of people, where many say the same things...
You come back when you have a new question, or want to say that you've solved the problem![]()
Move to an apartment!D degi said:Hello!
We have bought a 50s wooden house that we have renovated.
One thing we have done is remove the knee walls to get "bigger rooms."
BUT
When you walk on the upper floor, it "thuds" a lot. (it didn’t do that before)
The closer you get to the removed knee wall, the more it thuds.
(It thuds even when my 4-year-old walks upstairs and we are sitting downstairs, so very sensitive)
The beams that go are very sturdy, I tried putting even more joists in between, but it didn’t work.
Now I’m starting to think that the knee walls had a function that pressed down the beam running along the house’s long side and thereby made it "stiff."
In the places where we still have the knee walls, the floor is perfect.
Anyone experienced the same?
My thought is to put up a couple of thick joists that "press down" this beam at the wall sides.
Or does anyone have a tip?
I would be very grateful for that.
Here is a picture when the floor is open, and the green line is where the knee wall was before.
There's already so much nonsense here: Why not fill the house with foam sealant?K Krille4 said:The original poster (OP) has probably realized their mistake now that it's been pointed out in about 100 posts. That an engineer needs to be hired and that it needs to be fixed seems obvious.
The question is whether there are more tips on what the OP can do right now to minimize the risks until the fix?
/Krille
It is oversized to withstand a worst-case scenario, like a snowstorm that occurs once every 50 years. So probably no risk of collapsing, and wood is very elastic, but if the roof does bend in
Thinking of attaching a helium balloon to the roof to counteract gravity. To quiet the thumping? just pull the kid by the ear so they learnT torkelb said: