Is Ytong glue and KC mortar M10 the same thing

[Jorhammar]

I'm going crazy, the holes in the hammarband for M12 rods need to be filled with KC bruk M10 (A)
But it seems impossible to get hold of it.
When I read the bag of ytong glue, it says M10 and the rest in Polish which I can't read

What should I use?

 

[corre]

M10 is a classification for high-strength mortars. You should reasonably be able to use any M10 classified flowable mortar, unless you have a manufacturer specification for a specific mortar from the supplier or designer.

 

[Jorhammar]

M10 is a classification for high-strength mortar. You should reasonably be able to use any M10 classified thin-flowing mortar unless you have a manufacturer specification for a certain mortar from the supplier or designer.

So even if it's called Ytong adhesive or Mortar or thin-joint mortar, I can use it as long as both are M10

 

[corre]

Yes. Probably Ytong calls it glue because they manufacture and sell wall elements or blocks that are assembled with their own cement-based product.