Hello!
Yes, the trusses support themselves... But it depends on how they are dimensioned.
And if you want to distribute the load so that not all of it ends up on the side walls.
There can be many reasons to add a ridge beam. You need to look at the drawings to understand.
Yes, the trusses support themselves... But it depends on how they are dimensioned.
And if you want to distribute the load so that not all of it ends up on the side walls.
There can be many reasons to add a ridge beam. You need to look at the drawings to understand.
I will have a beam in my construction. But it is not instead of rafters and not to brace the roof, rather the floor between the ground floor and the upper floor will hang from the beam to avoid having a column in the living room. The span will be 7x8m, and I don't want the floor to be thicker than 220. So there can be other reasons to have a beam than just to brace the roof instead of rafters.
The upper floor will be divided with a wall, and inside the wall, the beams will be placed that the floor will hang from. So instead of having a beam downwards, I will have it upwards where I don't have to see it. And the beam will lie between the ridge and the collar beam.
But the question might be, what dimension is your ridge beam?
The upper floor will be divided with a wall, and inside the wall, the beams will be placed that the floor will hang from. So instead of having a beam downwards, I will have it upwards where I don't have to see it. And the beam will lie between the ridge and the collar beam.
But the question might be, what dimension is your ridge beam?
Last edited:
A ridge beam made of glulam is used if you don't want any roof beams between the long side walls, meaning completely open to the ridge. Without the ridge beam, the roof would collapse even though each roof holds up the opposite roof, but the side walls would be pushed outward by the weight. With the ridge beam, all the weight is instead placed on the gables, which should be significantly reinforced, especially if you plan to have many windows in the gables. An A beam, on the other hand, has these beams, and then no ridge beam is needed.
/CC
/CC
Well..... Of course, it's possible to combine the different methods..
it's not black or white either beam or truss..
Check here http://www.takstolsfabriken.se/
choose trusses/quote request and A-truss... then an image and a red text will appear...
it's not black or white either beam or truss..
Check here http://www.takstolsfabriken.se/
choose trusses/quote request and A-truss... then an image and a red text will appear...
