thread in wood

[Mrp666]

Hello, hello... I'm wondering a bit about which taps to use for wood..? Do the regular ones for metal work..? Also, a small question about which thread nivell uses...

Best regards, Johan

 

[SBH]

it usually works with the same as for metell. but there are probably special ones too.
nivell has a "special" with a flat drill and a threading tool. unfortunately, I have no idea about the dimension

 

[Mrp666]

Okay, thanks for the answer.. I can borrow taps from work so that would be good... 2000 bucks for that package is a bit much I think...

 

[SBH]

are you planning to buy lumber that drills and threads by itself?

 

[Mrp666]

I had an idea about it...

 

[Mrp666]

Do you have any experience with something similar..? Was thinking about ventilation under etc...

 

[SBH]

then I would have bought their tools. so that everything happens at the same time. the gängverktyget can be sold later. they are usually also available used to buy

 

[SBH]

not to drill and make rules yourself. I think the level system is easy to deal with.
it wouldn't work with a spånskiva system? can't remember what it's called right now

 

[SBH]

now I found.
something like this http://hisab.se/1.0.1.0/25/1/#.U05dQfl_vkg

 

[Mrp666]

Okay.. found some platon system that seems convenient but don't really know how they work if you put cellplsst on the mat or something

 

[SBH]

do you want to get rid of moisture or radon?

 

[Mrp666]

Moisture from the slab 70s house, unexpected huh...

 

[Mrp666]

The link there looked interesting ...

 

[SBH]

oki doki. then I think about heights
ghia ventat construction height 52-250m
oventat 26-250mm
nivell 15-402mm
platon (blå) 6mm

 

[Mrp666]

What should one believe ... the platon mat seems smooth, the question is how to proceed on the mat .? As mentioned, it must be elevated a bit. .